Chip Array LED

New generation LED technology

S-2070 is a new light of SWIT Chip Array LED family, with smaller size and lower consumption for hand HD camcorders.

The new generation LED technology, Chip Array LED, integrates the LEDs into a chip with high brightness output but in smaller size, and the most remarkable, it offers a equally spread, soft, non-glaring light, similar to the traditional Halogen bulb light. 

13W Power Consumption,

70W Bulb Equivalent

800Lux @1 meter distance and 1 meter scale

S-2070 requires only 13W power consumption but can output bright light equivalents to an 70W halogen bulb. The illuminance is 800 Lux at 1 meter distance and 1 meter scale.

Compact Size

Ideal for HDV camcorders

S-2070 is compact size designed, smaller than SWIT S-2041 and S-2050 Chip Array LED light, and more suitable to use on small camcorders.

60° Wider Beam Angle

Equally spread lights, no visible beam edge

The traditional LED lights use lens to converge and get a higher brightness, but dropped down quickly around, which will generate a visible lighting border in the image.

In comparison, the S-2070 Chip Array LED generates a 60° wider beam angle, equally spread from the center to edge, and suitable for HD shooting.

Glareless light, Single Shadow

The traditional LED array always generates several highlight pots on retina and people will feel glaring, even can’t recover sight until a few seconds. In comparison, the SWIT Chip Array LED has only one bulb in appearance, and output a non-glaring, single shadow light, suitable for close interview shooting.

3200K/5000K/5600K Color Temperature

The S-2070 LED has 5000K color temperature and also equipped with a 5600K (Daylight) and a 3200K (Tungsten) color temperature filter. You can switch the color temperature easily.

6-17V Wide Voltage Power Supply

The S-2070 accepts 6-17V wide voltage input, so you can get power from 14.4V V-mount/Gold Mount batteries or 7.2V DV batteries.

The light package goes with a D-tap to pole-tap cable (S-7104), to plug into the DC-IN port of S-2070 and get power from D-tap power output sockets, such as batteries, battery plates, or camera handle. You can also select SWIT pole-tap to pole-tap DC cable (S-7108) to get power from pole-tap DC adaptors.

By installing a particular DV battery plate, you can directly mount a 7.2V DV battery onto the rear of the S-2070 light. 

Interchangeable DV plates

You can power the S-2070 by most popular DV batteries, via the easy interchangeable DV battery plates. We supply the following 

DV plates for optional:

Power by Special Compact Battery

By optional purchased battery S-8040

If you want a compact battery power solution, you may choose SWIT S-8040 Li-ion battery to instead of the DV plates and DV batteries.

The S-8040 is specially used for SWIT S-2041 and S-2070 lights, with 7.2V, 21Wh/3Ah capacity, and can run nearly 1 hour and 40 minutes on S-2070.

The S-8040 has a 4-level power indicators and a pole-tap charging input socket. You can use SWIT portable Pole-tap charger S-3010D to charger S-8040.

Dimmer control

S-2070 has a dimmer controller to adjust the light output from 10%-100%. The color temperature will not change during the dimmer controlling. 

Easy Installation

Both cold-shoe and screw

S-2070 offers a dual purpose installation base, that can be fixed to camera via both cold shoe and 1/4” screw head.

Standard Package

Swit S-2070 package includes: 

1x Interchangeable DV plate

(S-7004 series, optional for different types)

1x Portable bag

Optional accessory:

DC power cable 

(S-7104 D-tap to Pole-tap or S-7108 Pole-tap to Pole-tap optional)

S-8040 Compact Li-ion Battery

S-3010D Ultra portable single channel charger