9-inch Full HD LCD IPS panel with LED backlight

The S-1093F adopts a 9-inch IPS (In-Plane Switching) LCD panel, with Full HD 1920×1200 resolution and LED backlight, 800:1 contrast. The viewing angle is Horizontal: 170° / Vertical: 170° 

LCD Protective Glass

The LCD of S-1093F is overlaid with a glass, protects the screen against scratch or broken.

Input/Output Interfaces

SDI / HDMI / CVBS / Analog Audio

S-1093F monitor supports:

2K/3G/HD/SD-SDI input × 2

2K/3G/HD/SD-SDI loop output × 2 

HDMI input × 1

HDMI loop output × 1 

CVBS input × 1

CVBS loop output × 1

3.5mm analog audio input × 1

3.5mm analog audio output × 1

Video Analysis Assistant Pattern

Waveform / Vector scope / Histogram

S-1093F supports video analysis assistant patterns includes: Waveform (Y/Pb/Pr/R/G/B), Vector scope, Histogram (R/G/B/Y), to convert the digital video quality info (Luma, Color, Saturation, etc) to patterns, and the patterns can be switched on/off individually, select display position (Up/Down/Left/Right), size, color, and translucence. 

Embedded audio monitoring

Up to 16-ch meters with alert and select output

S-1093F supports SDI-16ch and HDMI-8ch embedded audio meters display, with marks and audio abnormal alert info. Users can also select any 2 channels audio to output via 3.5mm socket or speakers. The audio meter pattern position can be selected from one of four corners, and you can select to display only 2 channels, 8 channels, and full 16 channels. Also scale markers, alert info, and translucent of the audio meter pattern are selectable.

UMD and Text-Tally Display

TSL 3.1 / 4.0 Protocol

S-1093F supports UMD and Text-Tally display of TSL 3.1/4.0 protocol, with 1-126 TSL address selection, and Max 8 letters displayed. The UMD/TALLY signal inputs via RJ45(RS485) port on the rear panel of the monitor.

Peaking, R/G/B/Mono only, Zebra, False color

Timecode, H/V delay, AFD, Scale Markers

USB Firmware Upgrade 

3-color TALLY Light

RJ45(RS485) input signal

There are front and rear TALLY lights of Red, Green and Yellow colors, and users can define the pins of RJ45 port to control the TALLY lights.

Sun Hood

Waveform

Y/Pb/Pr/R/G/B and single line

The waveform is a pattern to measure and display the brightness and its distribution of every column of the input video, separates the Y, Cb, Cr, R, G, B channels, and support single line waveform. You can select 0-1079 lines of the image, to display waveform of this single line. 

Vector Scope

Histogram

R/G/B/Y parallel display

The histogram is a bar graph that shows the distribution of R/G/B/Y(Luma) values in the image. The histogram is takes broadcast standard safety highest value as 100%, and 107% as the real highest value. The R/G/B/Y distributions between 100% and 107% are considered as ineffective values in broadcast standard, and marked in yellow to warn.

Audio Meter Level

With alert info and select any 2 channels to output

Support SDI & HDMI embedded audio meters display, and 3G/HD-SDI displays 16-ch, SD-SDI and HDMI displays 8-ch. The audio meter is green, and will turn yellow when exceeds -20dB, and turn red when exceeds -9dB. You can also select any 2 channels audio to output via 3.5mm socket or speakers.

GPI Interface and Control

The RJ45(RS485) port on the rear panel supports UMD control and GPI functions setting and control. There’re 4 GPI pins and can be assign the following functions, by shorting with GND pin to enable the functions.

Red TALLY Vector scope

Green TALLY Audio meters

Yellow TALLY Histogram

Aspect Ratio False Color

Scan Mode AFD

Image Flip H/V Delay

Zoom Mode R/G/B/Mono

Mute Scale Markers

Freeze Frame Colorbar

Color Temperature UMD

Timecode Audio Alarm

Zebra Stripes Focus Assist

Multiple Power Sources

AC adaptor / V-mount / Gold mount / Snap-on DV mount

The monitor provides a 4-pin XLR socket of DC 6.5-24V power input, and can be fixed on V-mount, Gold mount or DV battery plate.

Various types of DV battery plates are provided for optional, with snap-on designed, quick released and interchangeable with each other. There’re following DV plates for selection: 

Model of Plates - Compatible batteries

S-7004A  Gold Mount (Anton Bauer)

S-7004S  V-mount

S-7004F SONY NP-F970/770, SWIT S-8972, S-8970

S-7004U SONY BP-U60/U30, SWIT S-8U63,S-8U93

S-7004D Panasonic D54/D28,VW-VBD58;SWIT S-8D62, S-8D58

S-7004B Panasonic VW-VBG6, SWIT S-8BG6

S-7004V JVC BN-VF823, SWIT S-8823

S-7004i SSL-JVC50, SWIT S-8i50

S-7004C Canon BP-945/970G, SWIT S-8845, S-8945

S-7004E Canon LP-E6, SWIT S-8PE6

Package Options

S-1093F offers the simple package and luxury package for option. 

Simple package includes:

1x Battery plate (V-mount or Gold mount or snap-on DV mount optional)

1x Cold shoe / Screw Articulating Arm trestle

1x Sun hood

1x 4-pin XLR power adaptor (A-PA03)

Luxury package includes additional:

1x U shape desktop bracket

1x D-tap to 4-pin XLR DC cable (S-7101)

1x Carrying case (A-CC09)

Specifications: